PIRMAX RT Panel
High Thermal Performance Insulation Panel for Green Roofs and Roof Top Applications
Product Introduction
PIRMAX RT Panel is a modified PIR (Polyisocyanurate) rigid thermal panel that can be used for rooftop green roofs and laminating applications. PIRMAX RT PANEL is a light weight closed cell PIR consisting of a foam inner core, thermoset between two layers of embossed aluminum foil facings or tissue fibre face to both sides of the board. PIRMAX RT PANEL can also be manufactured in a tapered form to enhance water drainage from flat roofs.
- Tested to with AS/NZS 4859.1.
- Achieves excellent fire hazard results when tested to AS/NZS 1530.3.
- RED LIST FREE product, ingredients are 100% disclosed to 100 ppm, and do not contain any Red List chemicals.
- Manufactured in Australia for fast manufacturing turnaround times.
Declare – Red List Free
Click here for further information regarding
PIRMAX RT certified by Declare as Red List Free!
Australian Made
PIRMAX RT PANEL is manufactured in Australia by an Australian owned and operated company, and guarantee the highest quality insulation material. As our products are wholly Australian Made we take pride in our manufacturing to ensure a high standard of quality, service and value.
Recycled Content
PIRMAX RT PANEL utilises a proprietary process that enables the use of waste PET bottles in the product, that otherwise would have been destined for landfills or found their way into our oceans and rivers. In this process, plastic waste is transformed into highly efficient insulation that helps conserve energy and reduce emissions.
Calculate how many bottles your project will recycle:
Applications
PIRMAX RT Panel is designed to be used as thermal insulation in green roofs and roof deck systems, protected by waterproofing membranes.
Typical applications include Roof Systems, Green Roofs, Concrete Roof Systems, Ground Floor Slabs.
Blank one so all stay closed
Product Details
| Product Name | PIRMAX RT FF Panel Foil Faced “modified PIR rigid thermal insulation” |
| Product Name | PIRMAX RT TF Panel Tissue Faced “modified PIR rigid thermal insulation” |
| Product Code | PIRMAX RT ______ (mm) |
| Panel Size | 2400mm x 1200mm (2.88m2). Also can be cut to custom lengths and sizes. |
| Facings | Foam inner core, thermoset between two layers of embossed aluminum foil facings or alternatively two layers of tissue fibre facings |
Product R Values
| Nominal Thickness | Product R-value |
|---|---|
| PIRMAX RT FF 50mm | R2.35 |
| PIRMAX RT FF 60mm | R2.85 |
| PIRMAX RT FF 70mm | R3.30 |
| PIRMAX RT FF 80mm | R4.00 |
| PIRMAX RT FF 90mm | R4.50 |
| PIRMAX RT FF 100mm | R4.85 |
| Nominal Thickness | Product R-value (Core Test Only) |
| PIRMAX RT TF 50mm | R2.22 |
| PIRMAX RT TF 60mm | R2.66 |
| PIRMAX RT TF 70mm | R3.11 |
| PIRMAX RT TF 80mm | R3.56 |
| PIRMAX RT TF 90mm | R4.00 |
| PIRMAX RT TF 100mm | R4.44 |
Summary of Testing Results
| Thermal | AS/NZS 4859.1 | Refer to table above |
| Ignitability Index | AS/NZS 1530.3 | PASS (Range 0-20) |
| Spread of Flame Index | AS/NZS 1530.3 | PASS (Range 0-20) |
| Heat Evolved Index | AS/NZS 1530.3 | PASS (Range 0-20) |
| Smoke Developed Index | AS/NZS 1530.3 | PASS (Range 0-20) |
| Water Vapour Resistivity | AS1366.2/AS 2498.3 | 10-15 (g/m2.24h) water transmission rate |
| Compressive Strength | AS1366.2/AS 2498.3 | ≥100+ (kPa) at 10% compression |
Environmental
| Declare | Red List Free (does not contain any Red List Chemicals) |
| Volatile Organic Compounds (VOC) | <0.01 mg/m3 |
| Transport | Australian made & owned, not transported from overseas, minimal carbon footprint |
| Energy Efficient | Long term energy savings and environmental benefits |
Declare – Red List Free
Click here for further information regarding
PIRMAX RT certified by Declare as Red List Free!
Installation Instructions
Before installing PIRMAX RT PANEL make sure that all documentation has been approved for the application by a relevant building professional, and installation is by a trained applicator.
