Kingspan Kooltherm K10 G2 Soffit Board
Group 2 Fire Classification; High Thermal Performance Insulation Panel
Product Introduction
Kooltherm K10 G2 is a ceiling insulation board which is quick and easy to install with NCC and AS/NZS 4859.1:2018 compliance.
It has a fibre-free, phenolic core and both an upper tissue-based facing and a lower facing of reflective aluminium foil, along with a slim profile.
- Australian Made.
- CodeMark Certified for NCC Compliance.
- NCC and AS/NZS 4859.1:2018 Compliant.
- Group 2 NCC fire classification.
- Global GreenTag GreenRate™ Certified.
- Fibre-free, closed cell insulation core.
- Silver finish, also available in white.
National Distribution
Reflex Insulation are proud to stock and supply the Kingspan Kooltherm K10 G2 Australia wide, through our warehouses in every major capital city.
As a national distribution partner of the full range of Kingspan Kooltherm products, we enhance accessibility and efficiency of the delivery of Kingspan products in Australia.
With extensive local stockholdings in all major capitals across Australia we provide Kooltherm customers with efficient turnaround times of stock, and improved customer experience.
Applications
Kooltherm K10 G2 Board is designed to be used in exposed wall or ceiling/soffit applications typically in commercial or multi-residential use, it can also be used in residential applications.
The Kooltherm K10 G2 Board is designed to be mechanically fixed into concrete or masonry substrates in accordance with the installation instructions.
Typical applications include Soffit (Carpark Applications), Wall Systems, Suspended Timber and Concrete Floors, Ground Floor Slabs, Ceiling Systems, Roofs.
Blank one so all stay closed
Product Details
| Product Name | Kooltherm K10 G2 |
| Product Code | Kooltherm K10 G2 ______ (mm) |
| Panel Size | 2400mm x 1200mm (2.88m2) |
| Facings | Inner: Tissue-based Outer: Silver foil |
Product R Values
| Nominal Thickness | Declared R-value (m2K/W) |
|---|---|
| 25mm | R1.10 |
| 30mm | R1.30 |
| 40mm | R1.75 |
| 45mm | R2.05 |
| 50mm | R2.30 |
| 60mm | R2.75 |
| 70mm | R3.20 |
| 80mm | R3.65 |
| 90mm | R4.10 |
| 100mm | R4.60 |
Summary of Testing Results
| Thermal | AS/NZ 4859.1:2018 | Refer to table above |
| Group Number | AS 5637.1:2015 | Group 2 |
| SMOGRARC | AS 5637.1:2015 | ≤ 30 m2/s2 x 1000 |
| Early Fire Hazard Properties (Ignitability, Flame spread, Heat release, Smoke release) | AS 1530.3 | Spread of Flame Index: 0 Smoke Development: ≤ 3 |
| Compressive Stress (Insulant) | AS 2498.3:1993 | On average exceeds 100 kPa at 10% compression |
| Water Vapour Transmission | ASTM E96 – Part B 2016 | > 35 MN.s/g |
| Emittance (Foil Face) | ASTM C1371:2015 | E0.05 Standard |
Certification Approvals
Global GreenTag GreenRate-certified
Specification Notes
The soffit insulation shall be CodeMark-certified Kingspan Kooltherm® K10 G2 Soffit Board ___ mm thick, Group 2 tested in accordance with AS 5637.1:2015, with a tested SMOGRARC of not more than ≤ 30 m2/s2 x 1000, comprising a rigid thermoset phenolic insulation core with an upper tissue-based facing and a lower facing of reflective aluminium foil, manufactured under a management system certified to ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 by Kingspan Insulation Pty Ltd and shall be installed in accordance with the instructions issued by them.
A Project Specific Warranty provided by Kingspan Insulation must be submitted.
Installation Instructions
